Manual
Door Monitoring Cylinder
17 / 72
SimonsVoss
2 | Initial operation
Configuration/data
Illustration 8:
'Configuration/data' tab
The locking device is configured in the 'Configuration/data' tab
– You will see two sections: a target value and a current value
section. The target value section allows you to configure how
components should behave. The two sections will be identical
once you have programmed the changes
– Pulse length: how long should the cylinder engage to open? 125
sec
– Access control: the cylinder logs which particular transponder is
used at a particular time. The .ZK option is required
– Time zone control: certain people can open the door at specific
times only. The .ZK option is required
– Logging unauthorised attempted access events: the cylinder logs
when someone tries to open doors which they are not authorised
to use
– Flip flop: the cylinder engages permanently until another
authorisation is implemented. If flipflop mode is selected, bolt
monitoring in the DoorMonitoring Cylinder must be deactivated.
The bolt position is only displayed correctly if FF mode is
deactivated
– No audible battery warnings: the cylinder does not emit an audible
signal when the battery needs changing
