Introduction
Monitoring
The patented MEM2400LP Mechanical Electro Magnet locking device is designed for securing all types of
outward opening side hung hinged doors. The MEM Lock has a holding force up to 1000Kg and is equipped with
a long distance Light Panel (LP) for Secure (green) / Non Secure (red) local monitoring indication on the device.
The MEM2400LP has been Fire Tested for up to 4 hours to both AS & BS Standards. The MEM2400LP locking
device is capable of releasing under door back pressure (pre-load) of up to 70KG.
The MEM2400LP lock is provided with a number of unique monitoring features for either local or remote
indication:
i. Door Status Signal (DSS) 1 set of normally open contacts (N/O -- blue).
ii. Lock Status Signal (LSS) 1 set of normally open contacts (N/O -- yellow).
iii. Early Warning (EW) x 2. 2 sets of single throw double pole switches.
EW1: (N/O -- purple); (COM -- orange); (N/C -- pink).
EW2: (N/O -- gray); (COM -- brown); (N/C -- white ).
MEM2400LP Mechanical Electro Magnetic Lock
For Outward Opening Doors
Functions
The MEM2400LP Mechanical Electro Magnetic Lock operates on either 12 or 24 VDC. It is set ex-factory on
24VDC and can be changed over to 12V DC by voltage jumper selection(see installation diagram). When power
is applied to the lock and the door is in the closed position the Armature Plate is magnetically attracted to the
MEM device and both the DSS & LSS switches change status to NC.
When pressure is applied to the door in an attempt to open it unauthorised, the MEM Lock provides the patented
local or remote “Early Warning” (EW) security alarm indication.
The operating switch or controlling contacts must be installed directly from the power source across the MEM
Lock. The DC output of the power supply must NOT be connected to earth but floating to prevent shock and
possible damage to the unit.
Wiring and Power Input
Power supply
NO - LSS (YELLOW)
NC (PINK)
NO - DSS (BLUE)
NO (GRAY)
NO (PURPLE)
COM (BROWN)
COM (ORANGE)
NO - LSS (YELLOW)
NC (WHITE)
EW2
50 VDC,
0.3 A max.
NO - DSS (BLUE)
EW1, 50 VDC,
0.3 A max.)
+12 VDC, 0.24 A (RED)
+24 VDC, 0.12 A
- GROUND (BLACK)
30 VDC max, 0.3 A max, 10 W max
24 VDC max, 0.1 A max, 1 W max
Ensure that wiring is connected correctly before supplying power to the MEM Lock to prevent
damage to the unit.
NOTE:
1
