Manual
Door Monitoring Cylinder
3 / 72
SimonsVoss
1 | General information
1 General information
This manual is a supplementary document for the 'Digital Locking
Cylinder and Digital Half Cylinder 3061 – TN4' manual. The
aforementioned document describes the installation, operation and
battery replacement for the TN4 cylinder generation, which is also
used for the DoorMonitoring (DM) cylinder. The safety instructions are
also listed in the document, which are also valid for the DM Cylinder.
This particular document describes the DM Cylinder's functions.
When the basic functions are used, the DM Cylinder behaves in
exactly the same way as a SimonsVoss digital locking cylinder. For
this reason, this product description only deals with the special
features of the DM Cylinder. Reference is made to the product
manual for Digital Locking and Half Cylinder 3061 – TN4, its
installation and handling.
1.1 Safety instructions
SimonsVoss Technologies GmbH reserves the right to make changes
to the product without prior notification. For this reason, descriptions
and illustrations in these documents may differ from the respective
latest product and software versions. The original German version
should be taken as a reference in cases of doubt. Errors and spelling
mistakes excepted.
You can find more information about SimonsVoss products at:
www.simonsvoss.com Access through a door may be blocked due to
incorrectly fitted or incorrectly programmed components. SimonsVoss
GmbH is not liable for consequences of incorrect installation, such as
blocked access to injured persons or those at risk, physical damage
or any other losses.
People who have electronic, medical implants, such as pacemakers
and hearing aids, must maintain a minimum distance of 30 cm
between the implant and network components and should be
specially briefed about this requirement. As a precaution, people who
have implants should consult their doctor regarding any possible
hazards caused by radio component assemblies (868/915 MHz).
1.2 Description
Door Monitoring Cylinder 3061 [DM Cylinder] is an electronic locking
cylinder with integrated door monitoring. The integrated door
monitoring system in the DM Cylinder is fitted without any wiring to
the door.
Sensors within the DM Cylinder monitor the rotation of the cam.
Sensors in the intelligent fastening screw monitor the door's opening
status.
