SWK 360 A1
GB
│
IE
│
NI
│
47
■
Variant B plug connector :
You will need the following accessories to install the rod mount :
(+)
(+)
+
+
♦
Select one of the plug connectors / / .
♦
Push the plug connector / / into the fixture.
♦
Put the screw back into the mount and then tighten it again.
NOTE
►
Extend the plug connectors / / as required or use the plug connector to ball joint
adapter .
♦
Undo the screw on the plug connectors / / and remove it completely from the mount.
♦
Push the plug connector into the fixture.
♦
Put the screw back into the mount and then tighten it again.
♦
Place the thread of the camera onto the fixture of the plug connector
and screw the
camera tight.