SWK 360 A1
■
16
│
GB
│
IE
│
NI
Inserting/removing a memory card
CAUTION
►
Format any memory card before first use with the camera to ensure compatibility (see sec-
tion
System configuration
). Back up any existing files on the memory card as these will be
deleted when the memory card is formatted.
►
To avoid malfunctions, keep the memory card away from moisture, and avoid strong vibra-
tions, dust, heat sources or direct sunlight.
►
Insert the memory card as indicated by the icon on the slot. Never force the memory card
into the slot. Never bend or twist the memory card. Never touch the contacts on the memory
card.
►
After transport, wait until the memory card has reached ambient temperature before using
it for the first time. Major fluctuations in temperature or humidity can lead to condensation
which could cause an electrical short-circuit. Keep the memory card in the storage box .
►
Make sure that the camera is switched off before inserting the memory card.
NOTE
►
As the camera has no internal storage, it can only store captures if a memory card is inserted.
►
The device supports microSDHC memory cards with a capacity of up to 64 GB.
►
Use a microSDHC card with a speed rating of . Using memory cards with a speed rating
of less than can lead to picture errors during recording.
♦
To insert the microSDHC memory card into the microSDHC memory card slot ( ) in
the device, push it into the slot until it clicks into place. The contact surfaces of the microSDHC
memory card must be facing towards the front of the camera (see figure 07).
♦
To remove the microSDHC memory card from the microSDHC memory card slot ( ) in
the device, press the protruding edge of the microSDHC memory card in a little way until
it pops out (see figure 08). Remove the microSDHC memory card .
Fig. 07
Fig. 08
