SWK 360 A1
■
102
│
DE
│
AT
│
CH
Variante A Kugeladapter :
Folgendes Zubehör benötigen Sie zur Installation der Stangenhalterung :
+
+
♦
Stecken Sie den Adapter Steckverbindung auf Kugelgelenk zwischen die Halterung.
♦
Drehen Sie die Schraube mittels der Mutter wieder auf.
♦
Stecken Sie die Schraube wieder in die Halterung und schrauben diese anschließend fest.
♦
Lösen Sie die Schraubkappe des Adapter Steckverbindung auf Kugelgelenk .
♦
Drücken Sie das Kugelgelenk des Kugeladapters in die Schraubkappe des Adapter Steck-
verbindung auf Kugelgelenk .
♦
Drehen Sie die Schraubkappe des Adapter Steckverbindung auf Kugelgelenk wieder fest.
♦
Setzen Sie das Gewinde der Kamera auf die Aufnahme des Kugeladapters und drehen
die Kamera fest.
HINWEIS
►
Um die Kamera nachträglich zu justieren, lösen Sie die Schraubkappe und/oder die Mutter
der Steckverbindung und bringen die Kamera in die bevorzugte Position. Drehen Sie anschlie-
ßend die Schraubkappe und/oder die Mutter der Steckverbindung der Stangenhalterung
wieder fest.