SWK 360 A1
GB
│
IE
│
NI
│
27
■
Transferring/playing back captures on a computer
You can play/transfer your captures onto a computer in two different ways.
Using a USB cable
♦
Remove the side compartment cover from the camera (see section
Removing/attaching the
side compartment cover
).
♦
Connect the USB plug on the USB cable to a powered-on PC.
♦
Connect the micro-USB plug on the USB cable to the micro-USB port ( ) on the camera.
The camera switches on automatically (if not already switched on).
♦
USB mode is selected. Confirm USB mode with the
OK
button. The
icon appears on the
camera’s display.
Your computer detects the memory card in the device as a "Removable Disk" and automatically
installs the necessary drivers. Afterwards, you can use your file explorer to display the contents of
the microSDHC memory card . Now carry out the required file operations.
♦
Disconnect the USB cable from the camera to exit USB mode.
Using an adapter card
♦
Insert the microSD memory card in the adapter card (microSD to SD) (see figure 11).
♦
Insert the adapter card (microSD to SD) into a computer with an SD card slot.
Your computer detects the memory card as a "Removable Disk" and automatically installs the nec-
essary drivers. Afterwards, you can use your file explorer to display the contents of the microSDHC
memory card . Now carry out the required file operations.
NOTE
►
The adapter card (microSD to SD) has a write-protect lock. To protect the microSDHC
card from write access, slide the switch on the side of the card downwards (see figure 12).
►
The write-protect switch only protects the microSDHC memory card as long as it is in the
adapter card (microSD to SD) . As soon as you remove the microSDHC memory card ,
the write protection will no longer be available.
Fig. 11
Fig. 12
