SWK 360 A1
GB
│
IE
│
NI
│
45
■
Rod mount
♦
Undo the nuts (if necessary, completely) from the rod mount and remove the lower piece.
♦
Place the upper element of the rod mount around the rod and guide the lower element
through both screw ends so that the rod lies on both rubber plates.
♦
Screw the nuts onto the two screw ends.
♦
Undo the screw on the connector and remove it completely from the mount.
NOTE
►
You can also install the rod mount with the ball adapter or the plug connector .
Optionally, both systems can be combined using the plug connector to ball joint adapter .
►
The rod mount can be mounted on a bicycle, for example.
