SWK 360 A1
DE
│
AT
│
CH
│
101
■
Stangenhalterung
♦
Lösen Sie die Muttern, wenn notwendig vollständig, von der Stangenhalterung und nehmen
das untere Stück ab.
♦
Legen Sie das obere Element der Stangenhalterung um die Stange und führen das untere
Element durch beide Schraubenenden, so dass die Stange auf beiden Gummiplatten aufliegt.
♦
Schrauben Sie die Muttern auf den beiden Schraubenenden fest.
♦
Lösen Sie die Schraube der Steckverbindung und entfernen Sie diese vollständig aus der
Halterung.
HINWEIS
►
Sie können die Stangenhalterung mit dem Kugeladapter oder mit der Steckverbindung
installieren. Beide Systeme können durch den Adapter Steckverbindung auf Kugelgelenk
optional kombiniert werden.
►
Die Stangenhalterung kann z. B. an einem Fahrrad montiert werden.