SWK 360 A1
■
96
│
DE
│
AT
│
CH
Zubehör
Halterungen verwenden
Der Lieferumfang der Kamera enthält verschiedene Halterungen, um den Einsatz der Kamera in
unterschiedlichen Situationen zu ermöglichen.
HINWEIS
►
Zum Lösen sämtlicher Schrauben, kann ein Kreuzschlitzschraubendreher verwendet werden.
Helmhalterung
GEFAHR
►
Das doppelseitige Klebeband darf nicht an einem Schutzhelm verwendet werden, da die
Schutzwirkung beeinträchtigt werden kann.
HINWEIS
►
Die Helmhalterung ist nur für Helme mit Lüftungsschlitzen geeignet.
Folgendes Zubehör benötigen Sie zur Installation der Helmhalterung :
+
+
+
♦
Lösen Sie die Schraube der Helmhalterung und entfernen Sie diese vollständig aus der
Halterung.
♦
Stecken Sie den Adapter Steckverbindung auf Kugelgelenk zwischen die Halterung.
♦
Stecken Sie die Schraube wieder in die Halterung und schrauben diese anschließend fest.
♦
Lösen Sie die Schraubkappe des Adapters Steckverbindung auf Kugelgelenk .
♦
Drücken Sie das Kugelgelenk des Kugeladapters in die Schraubkappe des Adapters Steck-
verbindung auf Kugelgelenk .
♦
Drehen Sie die Schraubkappe des Adapter Steckverbindung auf Kugelgelenk wieder fest.