SWK 360 A1
DE
│
AT
│
CH
│
99
■
HINWEIS
►
Sie können alternativ das doppelseitige Klebeband verwenden, um die Armhalterung
an einen Gegenstand zu montieren. Entfernen Sie vor der Montage den Riemen der Armhal-
terung . Achten Sie bei der Montage auf eine saubere, fettfreie und trockene Oberfläche.
►
Wenn Sie das doppelseitige Klebeband nach der Montage wieder entfernen, darf es
nicht erneut verwendet werden.
Saugnapfhalterung
Folgendes Zubehör benötigen Sie zur Installation der Saugnapfhalterung :
+
+
♦
Lösen Sie die Schraubkappe der Saugnapfhalterung .
♦
Drücken Sie das Kugelgelenk des Kugeladapters in die Schraubkappe der Saugnapfhalte-
rung .
♦
Drehen Sie die Schraubkappe der Saugnapfhalterung wieder fest.
♦
Setzen Sie das Gewinde der Kamera auf die Aufnahme des Kugeladapters und drehen
die Kamera fest.
HINWEIS
►
Lesen Sie vor weiterem Vorgehen das Kapitel
Grundlegende Sicherheitshinweise
.
♦
Setzen Sie den Saugnapf fest auf eine Scheibe, z. B. Windschutzscheibe, und drücken den
Verriegelungshebel in Richtung der Scheibe. Dadurch wird ein Unterdruck erzeugt und der
Saugnapf fest an die Scheibe gezogen. Bewegen Sie den Verriegelungshebel entgegengesetzt,
um den Saugnapf wieder von der Scheibe zu lösen. Um das Lösen zu erleichtern, ist am Saug-
napf eine Lasche angebracht.