SWK 360 A1
■
46
│
GB
│
IE
│
NI
Variant A ball adapter :
You will need the following accessories to install the rod mount :
+
+
♦
Push the plug connector to ball joint adapter into the socket.
♦
Unscrew the bolt using the nut.
♦
Put the screw back into the mount and then tighten it again.
♦
Undo the screw cap on the plug connector to ball joint adapter .
♦
Push the ball joint on the ball adapter into the screw cap on the plug connector to ball joint
adapter .
♦
Retighten the screw cap on the plug connector to ball joint adapter .
♦
Place the thread on the camera onto the fixture of the ball adapter and screw the camera
tight.
NOTE
►
To adjust the camera, undo the screw cap and/or the nut on the plug connector and move
the camera into the required position. Then re-tighten the screw cap and/or the nut on the
plug connector of the rod mount .