background image

INSTRUCTION MANUAL

CCD COLOR CAMERA

IK-1000

TABLE OF CONTENTS

IMPORTANT SAFEGUARDS ................................................. 3

1. CAUTIONS ON USE AND INSTALLATION ................... 5
2. COMPONENTS ............................................................. 6
3. NAMES AND FUNCTIONS ........................................... 6
4. CONNECTION ............................................................. 10
5. LENS ADJUSTMENT .................................................. 11
6. OPERATION ................................................................ 13
7. MODE SETTING BY ON SCREEN DISPLAY ............. 17
8. TROUBLESHOOTING! ................................................ 32
9. EXTERNAL VIEW ........................................................ 33

10. SPECIFICATIONS ....................................................... 34

Please read this manual thoroughly before use, and keep it handy
for future reference.

Record in space provided below the Model No. and
the Serial No. as found on the label on the bottom
of this unit.
Model. No. IK-1000

Serial No.

Retain this information for future reference.

Summary of Contents for IK-1000 - Starlight Color Video Camera CCTV









































Reviews: