UNOCODE 299
Operating manual - English
42
Copyright Silca 2002
6
CLEANING
•
keep the operational parts of the machine as clean as possible by brushing away the chippings
in areas where they accumulate during cutting operations.
•
under no circumstances must compressed air be used to clear the work zone of chippings as
this will blow them onto the moving parts.
•
Never use oily products or thinners for cleaning painted surfaces, clamps, electrical or
electronic connections.
Summary of Contents for Unocode 299
