Operating manual - English
UNOCODE 299
Copyright Silca 2002
31
5.6
[5] M
AINTENANCE
1) enter the ‘Maintenance’ menu #5.
Operational keys:
use the
keys to move the cursor to the option required
and press ENTER or directly press the numbered key corre-
sponding to the option number.
5.6.1
T
ESTS
There is an on board TEST menu that should be
used to verify the cause of any breakdown that
may occur to the machine.
•
Test 1: X AXIS MOTOR
Carefully follow the instructions on the machine’s display. Check that the X axis carriage moves.
ATTENTION: during this test function all end of run controls are disactivated; avoid moving the carriage up against
its mechanical stops.
NOTE: if the motor does not start, contact Silca’s Technical Assistance Dept.
•
Test 2: Y AXIS MOTOR
Carefully follow the instructions on the machine’s display. Check that the Y axis carriage moves.
ATTENTION: during this test function all end of run controls are disactivated; avoid moving the carriage up against
its mechanical stops.
NOTE: if the motor does not start, contact Silca’s Technical Assistance Dept.
•
Test 3: CUTTER MOTOR
Carefully follow the instructions on the machine’s display. Check that the cutter motor is working.
NOTE: if the cutter motor does not turn, contact Silca’s Technical Assistance Dept.
•
Test 4: X AXIS SENSOR
-
the machine’s display should show ON when the carriage is drawn away from the machine (to-
wards the operator).
-
the machine’s display should show OFF when the carriage is pushed all the way in towards the
machine.
NOTE: if the ON/OFF transition is not made, contact Silca’s Technical Assistance Dept.
•
Test 5: Y AXIS SENSOR
-
the machine’s display should show OFF when the carriage is moved all the way to the right.
-
the machine’s display should show ON when the carriage is moved all the way to the left (towards
the cutter).
NOTE: if the ON/OFF transition is not made, contact Silca’s Technical Assistance Dept.
•
Test 6: PROTECTIVE SHIELD MICROSWITCH
Lift and lower the protective shield checking that the machine’s display indicates OFF to ON.
NOTE: if the ON/OFF transition is not made, contact Silca’s Technical Assistance Dept.
1 - Test
2 - Machine ‘0’ point
5 - Maintenance
6 - Options
ENTER
Summary of Contents for Unocode 299
