UNOCODE 299
Operating manual - English
32
Copyright Silca 2002
•
Test 7: ELECTRIC CONTACT
Use any metal conductor to contact clamp to cutter, checking that the machine’s display indicates OFF
to ON.
NOTE: if the ON/OFF transition is not made, check the brushes or contact Silca’s Technical Assistance
Dept.
•
Test 8: KEYBOARD
One at a time, press all the keys (except STOP) checking that an asterisk (*) appears for each key pressed.
Press the STOP key for last.
NOTE:
if the asterisk does not appear,
contact Silca’s Technical Assistance Dept.
•
Test 9: DISPLAY
All points on the display should be obscured.
NOTE: if this is not so, contact Silca’s Technical Assistance Dept.
•
Test 10: SERIAL PORT
Check that the machine’s display indicates OFF.
Fit the special (Z4) serial test connector (accessories provided) to the machine’s serial port, checking
that the machine’s display indicates OFF to ON.
NOTE: if the ON/OFF transition is not made, contact Silca’s Technical Assistance Dept.
Summary of Contents for Unocode 299
