Silca Unocode 299, Operating Manual

Page: 22 / 67

UNOCODE 299 Operating manual - English
18 Copyright Silca 2002
5 OPERATING GUIDE
Introduction
The Operating Guide below explains how to use the UNOCODE 299 without a Personal Computer.
All operations to manually use the key-cutting machine are explained step by step.
The programs available for Personal Computers connected to the key-cutting machine are able to
transmit data for cutting.
Programs for Personal Computer eliminate manual procedures of certain functions, once the data has
been transmitted to the machine it bypasses some of the operating guides screens.
When the UNOCODE 299 is used with a Personal Computer, the operating guide does not change
its displays logic, with the exception of all the screens that are rendered unnecessary.
5.1 I
NITIAL OPERATIONS
When the key-cutting machine has been placed on its workbench and connected to the mains (ch.3.3,
page 10), proceed as follows:
1) make sure that the emergency button is not turned on.
2) turn the machine on by means of the main switch that is located on the back of the machine.
3) to check or alter the parameters for use of the machine, consult the "Options [6]" menu (ch.5.7,
page 36).
When the machine is turned on, for a few
seconds the display shows the internal
software version and the machine model:
M
AIN
M
ENU
Operational keys:
use the keys to move the cursor to the option required
and press ENTER or directly press the numbered key
corresponding to the option number.
The >> symbol indicates that the menu contains other items
which can be reached with the arrow key
.
UNOCODE 299
version 1.0.023
1 - Copy by code
2 - List of codes
3 - Queue from PC
4 - Calibrations
>>
5 - Maintenance
6 - Options