Silca Unocode 299, Operating Manual

Page: 28 / 67

UNOCODE 299 Operating manual - English
24 Copyright Silca 2002
5.2.2
LIMITED ACCESS TO DATA
(
PROTECTED SYSTEMS
)
Silca has predisposed limited access to some of the data in the Database, in compliance with agreements
with some makers. Limitations apply to:
- DATA CARD: If the key-cutting card is protected, access is denied.
Gain access to protected data in the following way:
-
request the maker’s authorization.
- communicate to Silca :
- The key-cutting machine SERIAL NUMBER
- The ACTIVATION CODE
- Key-cutting Machine ID
Silca will issue a Password to enter in order to enable key-cutting of the protected system.
Example: Silca provides a protected data card No. 11.
When card 11 is selected from menu -1- the following
appears on the screen:
When authorization has been received from the maker, apply to Silca for a password, providing the
following information:
- Key-cutting machine serial No. 1170145634567
Read the serial number on the ID plate fixed to the back of the machine.
- Machine ID 12345
visible in the password application box or by selecting menus 6-12-1 on the machine.
- ACTIVATION Code SKPSC00011
shown ONLY when access to protected data is attempted.
Once obtained, enter the password on the Password
line, as shown in the example given above.
If the correct password has been entered, the screen
shows:
The password can be saved so that it need not be entered whenever the protected data card is used, or
not saved so that access is limited only to the person in possession of the password.
5.3 [2] L
IST OF CODES
ATTENTION: function currently not available! (for future use)
PROTECTED CARD
Mach.ID: 12345
Code: SKPSC00011
Password: 0
CORRECT PASSWORD
Save the password ?
No=STOP Yes=ENTER