manualshive.com logo in svg

Sifos Technologies PhyView PVA-3000, Reference Manual

The Sifos Technologies PhyView PVA-3000 is a cutting-edge network testing device. For a comprehensive understanding of its features and operation, refer to the Reference Manual, which is available for free download from our website. Discover everything this powerful tool has to offer at manualshive.com.

Share
Download
background image

PVA-3000 Reference Manual 

December 2, 2019

 

                                   

Sifos Technologies

  

Page 
71 

4. 

PowerShell PSA Software 

PowerShell PSA is a script development and interactive command execution shell built upon the Tcl/Tk scripting 
language (version 8.4.5 or later).   Tcl/Tk is an open source, portable, and easily extendable programming language 
developed for Unix (Linux) and subsequently extended to Windows and MAC operating systems.   Compiled versions 
of Tcl/Tk are available from the ActiveState Web-Site  (www.activestate.com).   

Tcl/Tk as required for the PhyView 

Analyzer will automatically be placed on Microsoft Windows computers when PVA software is initially installed

. 

 
Tcl (Tools Command Language) is a scripting language consisting entirely of commands for developing programs that 
run on and utilize command line interfaces.   Tk is a significant extension to Tcl to enable Graphical User Interface 
(GUI) applications that are (for the most part) platform-independent.   

4.1. 

TCL and Wish Shells 

PowerShell PSA is provided with access to both a Tcl shell and a Wish shell.   Shells are interactive command consoles 
just like the traditional DOS command shell that accompanies Windows or a “terminal” shell in Linux.   In fact, when a 

Tcl 

or 

Wish shell

 is opened on a Windows-based system, traditional DOS commands such as “dir” are fully available. 

 
Both Tcl and Wish shells support interpretive command execution, meaning commands may be typed and executed 
immediately when the [Enter] key is pressed.   There is no compilation or linking required for Tcl/Tk commands.   This 
feature makes Tcl/Tk an attractive solution for instrument control.   Tcl is also quite powerful at managing and 
analyzing arbitrary data structures through its “list processing” capabilities.  There is a considerable body of 
information regarding Tcl and Tk that is freely available over the Internet.   Additionally there are some commonly 
used reference books including  “Practical Programming in Tcl and Tk” by Brent Welch.   The remainder of this 
manual will assume that the reader has some familiarity with Tcl – familiarity with the Tk extensions to Tcl is not 
necessary. 

 

The 

Tcl Shell

 (see 

Figure 4.1

) is purely a command entry and program execution shell that does not support GUI 

application development.   It supports keyboard entry, mouse operations, and shell configuration in a manner consistent 
with the host command shell (e.g. Windows “cmd” shell or Linux “terminal” shell).   It supports interactive user 
prompting (via “standard input”) from a script.   The Tcl Shell will not support Tk graphical interface extensions. 

 

The 

Wish Shell

 (see 

Figure 4.3

) is a newer shell designed to enable GUI application development.   PowerShell Wish 

uses the top-level window created by the 

Wish Shell

 to present a “Close PowerShell” button since the console window 

opened by 

Wish

 is subsidiary to the top-level window.   As with the 

Tcl Shell

, the 

Wish Shell

 may be used either for 

script execution or interpretive command execution.   PowerShell Wish must be used by any applications or command 
sequences that produce PSD traces since these require the Tk resources available under Wish. 

4.1.1. 

Tcl Versus Wish in the PC Windows Environment 

On Microsoft Windows systems, when a 

Tcl Shell

 is opened, users may right-click on the title bar to set properties for 

the console shell.   Generally, PC users will benefit from configuring the shell properties to support “QuickEdit” and 
“Insert” modes.   Text may be copied using the mouse to select the text and pressing [Enter] on the keyboard.   Text 
may be pasted by using the mouse or cursor keys to position the cursor and then right-clicking the mouse.   One handy 
feature of the Tcl shell is ability to select and copy columns of text or data.  A second benefit is that the screen buffer 
length can also be configured to very large sizes as part of the console settings. 
 
Wish is more “Windows-like” in that users may use typical methods of selecting, inserting, deleting, and copy-paste as 
are used in other Windows applications.   Also, Wish is Tcl and PowerShell command-knowledgeable and will color 
code all known commands as they are typed into the shell.   Wish supports Tk graphics and offers easy access to 
graphical user interface commands and tools such as message boxes.   PowerShell Wish enables the display of PVA-
3000 PSD traces using a single command from the shell.   One limitation with the 

Wish Shell

 under Windows is that 

any applications utilizing command-line prompts to the 
user will not function properly since Wish is will not take 
“standard input” from the command shell.   Also, the 
screen buffer length is limited and fixed. 

4.2. 

PSA Connection Dialog 

Unlike PVA Interactive, PowerShell PSA has the 
capability to connect to any Sifos Technologies 
PowerSync Analyzer (PSA) or PhyView Analyzer (PVA), 
including instruments that may include both test blade 
types.  When 

PowerShell Tcl

 is opened (

see Figure 4.1

), 

a command line prompt notifies the user of the default (or 
last used) instrument address and offers an opportunity to 

Figure 4.1

 

PowerShell TCL Connection Dialog

 

Summary of Contents for PhyView PVA-3000







































































































































Reviews:

No comments

Related manuals for PhyView PVA-3000

Badger Meter Blancett B3100 Series User Manual preview
Blancett B3100 Series
Brand: Badger Meter Pages: 16
Badger Meter ModMAG M1000 User Manual preview
ModMAG M1000
Brand: Badger Meter Pages: 26
Badger Meter ModMAG M2000 Installation And Operation Manual preview
ModMAG M2000
Brand: Badger Meter Pages: 48
F&F LE-03 Quick Start Manual preview
LE-03
Brand: F&F Pages: 2
Camille Bauer SIRAX MM1200 Safety Instructions preview
SIRAX MM1200
Brand: Camille Bauer Pages: 12
Keithley 485 Quick Reference Manual preview
485
Brand: Keithley Pages: 32
Hama TH-200 Operating Instruction preview
TH-200
Brand: Hama Pages: 6
Hanna Instruments HI99151 Quick Reference Manual preview
HI99151
Brand: Hanna Instruments Pages: 2
Hanna Instruments HI736 Instruction Manual preview
HI736
Brand: Hanna Instruments Pages: 2
Hanna Instruments HI 991401 Instruction Manual preview
HI 991401
Brand: Hanna Instruments Pages: 2
Hanna Instruments HI 98140 Manual preview
HI 98140
Brand: Hanna Instruments Pages: 4
Hanna Instruments HI 8314 Instruction Manual preview
HI 8314
Brand: Hanna Instruments Pages: 2
Harley Benton ST Style User Manual preview
ST Style
Brand: Harley Benton Pages: 28
Aqualytic AL250T-IR Instruction Manual preview
AL250T-IR
Brand: Aqualytic Pages: 140
Qonnex 2-WIRE EMM.630CT-MID Quick Start preview
2-WIRE EMM.630CT-MID
Brand: Qonnex Pages: 2
Supertech agroline Superpro Combi Instruction Manual preview
Superpro Combi
Brand: Supertech agroline Pages: 10
Velleman DVM8020 User Manual preview
DVM8020
Brand: Velleman Pages: 38
Rebel MIE-RB-266 User Manual preview
MIE-RB-266
Brand: Rebel Pages: 28

Brands by name

Popular brands

Load more brands