manualshive.com logo in svg

Sifos Technologies PhyView PVA-3000, Reference Manual

The Sifos Technologies PhyView PVA-3000 is a cutting-edge network testing device. For a comprehensive understanding of its features and operation, refer to the Reference Manual, which is available for free download from our website. Discover everything this powerful tool has to offer at manualshive.com.

Share
Download
background image

PVA-3000 Reference Manual 

December 2, 2019

 

                                   

Sifos Technologies

  

Page 
93 

Command 

Command Parameters 

Returned 
Parameters 

psa_flash update 

<

recover

>

   

slot

,

port

 

|

 

all  

  

type  PVA

 

 

This command is used for updating PVA-3102 test ports with new 
firmware images previously downloaded into chassis flash memory. 

recover

:  Option to load firmware image to a test port that fails to appear 

in PSA chassis inventory. 

Not required for normal updating

. 

slot

,

port

  

Single test port to be updated with new firmware. 

all

:  Update firmware to all PVA test ports in currently connected PVA. 

type PVA

:

  Indicates that a firmware image is to be installed from chassis 

flash memory to a PVA-3102 blade.  (See Installation Guide for PSA 
blade firmware types.) 

psa_flash dir 

 

Firmware Files 

Returns the stored firmware file versions in the PSA-3000 controller 

psa_speed 

fast 

| 

slow

 | 

?

 

FAST | SLOW 

Sets a non-default backplane datacom speed to PSA/PSL instrument.  
Default is 

fast 

(57Kbaud) if PSA/PSL instrument has controller firmware 

version 3.18 or newer.  Otherwise it is 

slow

 (9.6Kbaud). Use 

?

 to query. 

psa_update_fw 

slot

,

port

 

file

 

“

filename

”

 

 

<

-y

> 

 

This command is used to download and install new firmware images to a 
PSA-3000 controller blade or to PVA-3102 test blades installed in older 
PSA-

1200 chassis’.  Note: 

This command will take several minutes to 

complete per port and must be sequenced one port at a time. 

slot

,

port

 

 Test port to be updated with new firmware.  Use 0,0 for updating 

PSA-3000 controller blade firmware.   Use N,N for updating PVA-3102 test 
blade firmware in a PSA-1200 chassis. 

file

:  Indicates following string represents path and file name of firmware 

image to download and install. 

filename

 local path & file name to be downloaded to the test port or 

controller flash memory.  Use forward slashes for directory level 
delimiters in 

filename

.  Enclose in quotes if there are spaces in 

filename

.   

-

y

 

Bypass user prompts and download immediately to selected port.  
(

Useful for automated updating to more than one port

.)

 

psa_enable 

? 

|  

feature_code 

<

enable

 | 

disable

>

 

Serial Number 
Feature Info 

Command is used for querying Serial Number and Features from a PSA 
Controller.  Also used to enable and disable features given a proper code.

 

NOTE: This command will run from either PowerShell Wish or PowerShell 
Tcl and requires PSA Software Version 2.0 or later.   

? 

 Returns current feature settings for connected PSA. 

feature_code

:  A unique alpha-numeric code provided when new features 

are purchased from Sifos for a specific PSA chassis or instrument. 

enable

:  Enable feature associated with the provided feature code.  

(Default action). 

disable

:  Disable feature associated with the provided feature code.

 

 

4.16.  PHY Performance Test Suite Commands & Utilities 

PHY Test Suite Commands include individual PHY Tests and a Test Sequencer command.   Individual PHY tests may 
be run on a selected test port and will return test status and results to PowerShell.   These tests cover Link Capabilities, 
Transmit Performance, and Receiver Performance for 10/100/1000BaseT Ethernet ports.  The automated Test 
Sequencer will sequence these tests according to the DUT supported capabilities and present the results to a graphical 
Microsoft Excel spreadsheet report, to user specified text files, or to PowerShell.  The Test Sequencer may be utilized 
in sequencing tests to any kind of DUT Port, that is from simple 10BaseT (MDI or MDI-X) to full 10/100/1000BaseT 
with auto MDI and any duplex mode.  

These commands require that the PHY Performance Test Suite is enabled

. 

 

Command 

Test 
Port 

Command Parameters 

Returned Parameters 

pva_caps 

port

 

 

(See 

pva_partner

 

for 

DUT capabilities) +  

10BaseT  

100BaseTX   

1000BaseT Counts 

Test assesses DUT link capabilities, both based upon advertised 
capabilities as well as ability to achieve a stable link-up with each 
of those advertised capabilities.   Assesses link rates (10, 100, 
1000 BaseT), Duplex Modes, and MDI / MDI-X Connectivity.   
Link Stability reported on a scale of 0 to 100 where 100 means 
full link stability. 

Summary of Contents for PhyView PVA-3000







































































































































Reviews:

No comments

Related manuals for PhyView PVA-3000

A&D SV-1A Instruction Manual preview
SV-1A
Brand: A&D Pages: 102
AccuEnergy Acuvim-L Series User Manual preview
Acuvim-L Series
Brand: AccuEnergy Pages: 83
C-LOGIC 8900 Instruction Manual preview
8900
Brand: C-LOGIC Pages: 4
C-lock GreenFeed Instruction Manual preview
GreenFeed
Brand: C-lock Pages: 32
C-LOGIC 8730 Instruction Manual preview
8730
Brand: C-LOGIC Pages: 12
Daewoo DSD-9502T Retuning preview
DSD-9502T
Brand: Daewoo Pages: 2
E+E Elektronik EE772 Manual preview
EE772
Brand: E+E Elektronik Pages: 32
Danfoss AK-LM 330 Design Manual preview
AK-LM 330
Brand: Danfoss Pages: 80
Conrad Electronic 30 11 12 Operating Instructions Manual preview
30 11 12
Brand: Conrad Electronic Pages: 38
LaserLiner 4K5 RA 800 Manual preview
4K5 RA 800
Brand: LaserLiner Pages: 52
Omega FMG3000 SERIES User Manual preview
FMG3000 SERIES
Brand: Omega Pages: 16
A&D AD-1611 Instruction Manual preview
AD-1611
Brand: A&D Pages: 10
Aalborg XFM 17 Operating Manual preview
XFM 17
Brand: Aalborg Pages: 56
PASCO ME-9837 Instruction Manual preview
ME-9837
Brand: PASCO Pages: 13
KAM Simple Precision OWD User Manual preview
Simple Precision OWD
Brand: KAM Pages: 41
J-TECH Solar Auxiliary Power Unit Operator'S Manual preview
Solar Auxiliary Power Unit
Brand: J-TECH Pages: 6
Lumel NA3 User Manual & Quick Start preview
NA3
Brand: Lumel Pages: 32
Badger Meter LM OG Series Instructions For Use And Maintenance Manual preview
LM OG Series
Brand: Badger Meter Pages: 32

Brands by name

Popular brands

Load more brands