Siemens SITRANS LR 300, Instruction Manual, Page: 43 / 140

7ML19985CL02 SITRANS LR 300 – INSTRUCTION MANUAL Page 41
m
mmmm
St
art
Up
Accessing PROGRAM Mode
PROGRAM mode has two states: EDIT and DISPLAY. In DISPLAY state, the parameter
number, parameter type, and parameter value are being displayed. In EDIT state, the EDIT
icon
indicates that the unit is accepting input into the current field. The icon remains
visible until the ENTER key has been pressed, and the new value is accepted.
Accessing a Parameter
The parameter settings configure the units to a specific use. Press the PROGRAM key
followed by the TOGGLE key: then choose Scroll Access or Direct Address to access a
parameter.
Scroll Access
In PROGRAM mode, you can scroll through the parameters sequentially and in either
direction until you reach the required parameter. [P000 to P999]
1.
The unit starts in RUN mode and
readings correspond to existing
settings.
2.
Press the PROGRAM key to
activate the PROGRAM mode.
(The number fields go blank.)
3.
Press the TOGGLE key to
display parameter fields. Initial
program starts at P000.
1. Press ARROW
keys to scroll
up or down.
Note:
Values shown are for demonstration purposes only.
Value
Parameter
field
SITRANS LR 300.book Page 41 Monday, June 10, 2002 7:18 PM