manualshive.com logo in svg

Siemens SITRANS LR 300, Instruction Manual, Page: 15 / 140

Share
Download
Siemens SITRANS LR 300 Instruction Manual Download Page 15

7ML19985CL02

SITRANS LR 300 – INSTRUCTION MANUAL

Page 13

mmm

mm

Inst
allat
ion

Installation

Mounting Location

•

Do not mount in direct sunlight without the use of a sun shield. Refer to Appendix III, 
Ambient/Operating Temperature Specification, on page 101 .

Notes:

• Installation shall only be performed by qualified personnel and in accordance with 

local governing regulations.

• This product is susceptible to electrostatic shock. Follow proper grounding 

procedures.

• Do not use a Ground Fault Interrupt (G.F.I.) with the SITRANS LR 300. The ground path 

is used for filtering purposes in conjunction with the universal power supply.

WARNING: This product is designated as a Pressure Accessory per 

Directive 97/ 23 / EC and is not intended for use as a safety device.
WARNING: Improper installation may result in loss of process 

pressure.

Note: Avoid mounting the unit at the centre: 

there is a greater likelihood of false 

readings.

Fl

at

 Conical

 Flat

 Parabolic

preferred 

undesirable

SITRANS LR 300.book  Page 13  Monday, June 10, 2002  7:18 PM

Summary of Contents for SITRANS LR 300













































































































































Reviews:

No comments