Siemens SITRANS F TRANSMAG 2, Operating Instructions Manual, Page: 94 / 126

Menu code Device func‐
tion,
Parameters
Description Factory setting Setting options
1.2 Multi-Display Simultaneous display of two measuring var‐
iables (actual meas‐
ured value line 1)
(actual meas‐
ured value line 2) • Menu 1.1.2
• Menu 1.1.3
1.3 Flow Flow value (actual meas‐
ured value)
1.4 Totalizer Flow quantity since totalizer start; volume
or mass, depending on selected unit (menu
3.1.1) (actual totalizer
reading)
1.4.1 Total. forward Forward flow only (actual totalizer
reading)
1.4.2 Total. rev. Reverse flow only (actual totalizer
reading)
1.4.3 Total. net Flow difference forward - reverse (actual totalizer
reading)
1.4.4 Set (all) Reset all totalizers simultaneously to zero
and stop or start;
(separate setting of totalizers, see menu
3.2.1, 3.3.1, 3.4.1) Cancel • Reset+Stop,
• Reset+Start
• Cancel
1.5 Flow Velocity Flow velocity in measuring tube in m/s (actual meas‐
ured value)
1.6 Frequency Calculated frequency value for actual flow
in Hz (actual meas‐
ured value)
1.7 Analog Out 1, 2 Calculated current value for actual flow in
mA (actual meas‐
ured value)
Diagnostics
Table A-2 Function group diagnostics parameters
2.1 Device status Device status, error messages ("OK" or error
messages)
2.2 Electr.Check Supervision of electrodes in sensor Inactive • Active
• Inactive
2.3 EmptyTube Det. Time interval for immersion check of elec‐
trodes or deactivation of immersion check.
In case of insufficient immersion of both
electrodes in conductive medium, ’Tube
empty’ is reported under device status. Inactive
• Inactive
• 15 s
• 30 s
• 60 s
• 120 s
• 300 s
2.4 Device Test
Self Test Check device status (duration approx. 60s)
2.4.2 Display Test Visual check of local display
2.5 Simulation
Parameters
TRANSMAG 2 with MAG 911/E
94
Operating Instructions, 03/2021, A5E00102775-AC