Siemens SIMATIC TIM 3V-IE DNP3, System Manual

Page: 212 / 354

The SINAUT Configuration Tool
6.6 TD7onTIM
TIM DNP3
212
System Manual, 12/2015, C79000-G8976-C253-04
Mean04W_S
Channel "MeanValueInput_x"
Channel type: Mean value send
Mean04W_S allows sending of up to 4 analog mean values. The data object is divided into 4
channels to each of which an analog value is assigned. Values in the range from 0 to 65535
are transferred.
The object occupies 4 indexes (1 index per activated channel).
Mean04W_R
Channel "MeanValueOutput_x"
Channel type: Mean value receive
Mean04W_R allows receipt of up to 4 analog mean values. The data object is divided into 4
channels to each of which an analog value is assigned.
The object occupies 4 indexes (1 index per activated channel).
As the data destination, an S7 word variable is specified for each active channel. When
receiving, values in the range from 0 to 65535 are accepted.
If values outside the range of validity are received, in the case of a station, the value is not
transferred to the S7 CPU. The DNP3 master station receives a negative acknowledgment
for such a command. For other ranges of validity, the data object "Dat12D_R" is available.
Note that with a write operation of the DNP3 master station, all active channels of the data
object are transferred to the assigned S7 CPU by TD7onTIM, even if the DNP3 master
station only sends 1 channel.
Dat12D_S
Channel "DataInput"
Channel type: Data send
Dat12D_S allows the sending of data of a size up to 12 double words in 1 channel.
Input address
Image 6-22 "Input address" box in the dialog of the "DataInput" channel