Siemens SIMATIC TIM 3V-IE DNP3, System Manual

Page: 263 / 354

Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
263
The dialog displays the following information for the station of the selected TIM module:
● The
path
of the TIM in the project
● The
subscriber no. of the TIM
● The
subscriber no. of the CPU
The lower part of the dialog displays the SINAUT objects and channels with their
parameters:
●
TD7onTIM Configuration
:
This area lists the following directories of the selected TIM as they are successively
expanded:
–
System objects (blue symbols)
– Data objects (yellow symbols)
– The cycle time
– Send and receive channels
●
Properties
:
This area displays the following properties of an object selected in the directory tree:
–
Parameter name
–
Value
–
Comment
The
Parameter name
column lists the individual parameters with colored symbols indicating
the following status:
- Blue symbols: Configured data
- Red symbols: Online data
The cycle time is displayed in the
TD7onTIM Configuration
box below the last data object.
This is the current time of a sampling cycle in which TD7onTIM samples the work memory of
its local CPU. If you click on the cycle time, the corresponding value is displayed in the
Properties
area.
Operator activities
1. Select a TD7onTIM-compliant module in the
SINAUT subscriber list
of the open project.
2. Open the dialog by selecting the
SINAUT / TD7onTIM Diagnostics
menu. The dialog
opens.
3. Expand the directory tree in the
TD7onTIM Configuration
area.
4. Select a SINAUT object or a send or receive channel in the opened directory tree. The
relevant parameters are displayed in the
Properties
area.