Siemens SIMATIC TIM 3V-IE DNP3, System Manual

Page: 177 / 354

The SINAUT Configuration Tool
6.6 TD7onTIM
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
177
3. Select a second destination subscriber in the list box.
4. Transfer the parameters to this other destination subscriber using "Paste" in the shortcut
menu.
6.6.7 Objects of TD7onTIM
Transmission direction of the objects
The transmission direction of the objects can be seen in the name suffixes _S or _R (send or
receive):
● _S
send direction
–
Use in the station type "station" for the monitoring direction (in)
Station sends message to master station.
– Use in the station type "master station" for the control direction (out)
Master station sends message to station.
● _R
Receive direction
–
Use in the station type "station" for the control direction (out)
Station receives message from master station.
– Use in the station type "master station" for the monitoring direction (in)
Master station receives message from station.
Overview of the TD7onTIM objects
Table 6- 5 System objects of TD7onTIM
System object Function
General system objects
WatchDog
Monitoring of the CPU-TIM connection
Indicates to the CPU whether the communication between CPU and local
TIM is still working; in other words, whether TD7onTIM is still reading from
and writing to the memory areas of the CPU.
PartnerStatus Displays the status of the connection with a maximum of 8 communications
partners
Signals to the CPU whether communication with a partner "DNP3 master
station" is functioning or disrupted.
OpInputMonitor Signals detection of hardware entries
Indicates the status of operator input to the CPU (with command, setpoint,
and parameter input).
Is not normally used with the DNP3 protocol.