Siemens SIMATIC TIM 3V-IE DNP3, System Manual

Page: 259 / 354

Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
TIM DNP3
System Manual, 12/2015, C79000-G8976-C253-04
259
Operator activities
1. Select a TIM module in the
SINAUT subscriber list
of the open project or in
Accessible
Nodes
.
2. Open the dialog by selecting the
SINAUT / TIM Subscriber Diagnostics
menu.
3. Select a subscriber in the selection list of the known subscribers on the left in the dialog.
4. To display the information on
Status
or
Partner
, click on the relevant tab.
Status
tab
The
Status
displays the following information on the subscriber selected on the left in the list
of known subscribers from the perspective of the connected TIM module:
● In the
General
field:
– Availability of the known subscriber. Entries indicating problems are highlighted.
– Any connection disruptions
– Information on gateways to the known subscriber (subscriber local / remote)
● In the
Connection
field:
– Interface of the connection
– Type of connection
– Connection enable
– Information on polling
– Status of data communication
Note
Media redundancy
With connections with redundant media, only one of the two connections is ever
active. As a result, in this dialog one of the two possible connections is displayed as
being not available.
● In the
Special
field:
Not relevant for DNP3