Siemens SICLOCK TC100 Operating Instructions Manual Download Page 96

Page: 96 / 124

Messages

12-9

SICLOCK

TC100 Operating Instructions

Processor has not been updated

System and
Information

A processor update has been performed, but the processor could not be updated.

Hardware time set

Information

The SICLOCK TC100 internal real-time clock has been set.

No usable NTP server

Information

No preferred server was found.

No hardware time

Application

A valid time could be read out of the hardware.

Critical temperature exceeded

Application

The critical module temperature has been exceeded.
See also

Temperature

(Chapter 9.3.5).

Link down EHT1

Application

The link status monitoring has found the status "Link down".
The triggering of an archive entry or alarm can be set with the following parameter:
/Network Settings/Ethernet 1/Extended Settings Adapter 1/Monitor Link Status
(0.05.09)

Microstep mode ignored

Application

A microstep mode has been circumvented once by the user.
See also

Synchronization

(Chapter 9.3.2).

NTP server selected

Information

A new NTP server has been selected.

NTP server unreachable

Information

The server is no longer available.

A parameter has been reset to the factory setting via the HMI

Information

A parameter has been reset to the factory setting via the HMI. The parameter number is
stated in the message text.

A parameter has been written via the HMI

Information

A parameter has been written via the HMI. The parameter number is stated in the
message text.

Sector in the parameter memory cleaned up

System

The data in the parameter memory has been cleaned up automatically.

Stabilized synchronization

Information

New stabilizer data are present, and are shown in the message.

Synchronization inconsistent

Information

The consistency check of an external synchronization was negative. The external
synchronization and the negatively tested offset are displayed.

Table 12-1

Overview of messages, with event type and brief description

Summary of Contents for SICLOCK TC100













































































































Search results

Summary of Contents for SICLOCK TC100

Reviews:

Siemens SICLOCK TC100, Operating Instructions Manual, Page: 96 / 124

Search results

Summary of Contents for SICLOCK TC100

Reviews: