Siemens SICLOCK TC100 Operating Instructions Manual Download Page 84

Page: 84 / 124

Parameter assignment

9-8

SICLOCK

TC100 Operating Instructions

9.3.5

Temperature

You activate the monitoring of the module temperature with the parameter entry
/Environment/Extended/Temperature/Monitoring (0.24.01).

You can set the following values:

•

Alarm

•

Warning

•

No monitoring

The current module temperature is shown in the parameter entry
/Environment/Status/Temperature (0.24.02).

9.3.6

Battery

You can switch the battery off for storage with the parameter entry
/Environment/Extended/Battery/Switch Off (0.25.01), and so substantially
lengthen the life of the battery in storage.

After a minimum operating period of 30 minutes after Power Up, SICLOCK

TC1

00 checks once whether the battery is switched off. If necessary, the battery

is t

hen switched on automatically, and a message is output.

See

Battery

(Chapter 11.1).

Notice

If the supply voltage is switched off while the battery is switched off, the SICLOCK
TC100 loses the hardware time and the archives.

This command may only be executed by qualified personnel.

Summary of Contents for SICLOCK TC100













































































































Search results

Summary of Contents for SICLOCK TC100

Reviews:

Siemens SICLOCK TC100, Operating Instructions Manual, Page: 84 / 124

Search results

Summary of Contents for SICLOCK TC100

Reviews: