manualshive.com logo in svg

Siemens SICLOCK TC100, Operating Instructions Manual, Page: 108 / 124

Share
Download
Siemens SICLOCK TC100 Operating Instructions Manual Download Page 108

A-10

©

 Siemens AG 2010 All Rights Reserved

SICLOCK

®

 TC100 Operating Instructions

Annex

A

A.1

Directives and declarations

Notes on the CE marking

The following applies to the product described in this documentation:

EMC directive

The devices fulfill the requirements of the EC directive "89/336/EEC Electromag-
netic Compatibility", and are designed for the following fields of application accor-
ding to the CE marking:

Declaration of conformity

The EC declaration of conformity and the corresponding documentation are made 
available to authorities in accordance with the EC directives stated above. Your 
sales representative can provide these on request.

Compliance with installation guidelines

The installation guidelines and safety instructions given in this documentation 
have to be adhered to during commissioning and operation.

Connecting peripherals  

The requirements for interference immunity are met when you connect a periphe-
ral suitable for an industrial environment according to EN 61000-6-2:2001. Peri-
pheral devices may only be connected via shielded cables.

Table A-1

Fields of application

Field of application

Requirements in respect of

Radiated interference

Interference immunity

Industry

EN 61000-6-4: 2001

EN 61000-6-2: 2001

Summary of Contents for SICLOCK TC100





























































































































Reviews:

No comments