Siemens SICLOCK TC100, Operating Instructions Manual, Page: 49 / 124

Configuration Tool
7-4
©
Siemens AG 2010 All Rights Reserved
SICLOCK
®
TC100 Operating Instructions
7.2 General functions
The toolbar of the Configuration Tool provides general functions for the parame-
ters and the archive. You can also acknowledge events, and authorize yourself in
the Configuration Tool.
Table 7-2 Possible operations and displays in the toolbar of the Configuration Tool
Field / button Meaning / instruction
Open
Loads a parameter assignment/an archive from the local file system
The file must be in the U600 format (*.u600). The parameter assignment
and the archive are loaded from the file when it is opened.
Notice
The currently loaded data (parameter assignment and archive) are
overwritten.
Save
Saves a parameter assignment/an archive to a local file system
The data (parameter assignment and archive) are saved in U600 format
(*.u600).
IP address
IP address of the SICLOCK TC100
Enter the IP address of the device here.
Connect to device
Disconnect from device
Connects to a device
The connection is established to the device with the given IP address.
Disconnects from device
The connection is terminated.
Die aufgebaute Verbindung wird getrennt.
See also
Connect / disconnect online connection (Chapter 7.2.1).
Authorization - password
Enter a password to enable a higher access level
Password supplied with device: "2222"
See also
Authorization (Chapter 7.2.2).
Authorize
Executes authorization with the password entered
Event
(online connection
required)
Events currently pending in the device
In online mode, the events pending in the device are shown (e.g.
warnings, alarms, etc.)
In offline mode, the display contains no information.
Confirm event
(online connection
required)
Acknowledges pending event
In online mode, an acknowledgment for the pending event is sent to the
device. Provided that it is acknowledgeable, the device deletes the event
from the display. Non-acknowledgeable events (persistent indications)
remain in the display.