Siemens SICLOCK TC100 Operating Instructions Manual Download Page 37

Page: 37 / 124

Connection

6-3

SICLOCK

TC100 Operating Instructions

Functional check

The incoming signal of the radio clock is indicated on the front panel by the
"RADIO CLOCK" LED.

The status of the radio clock is displayed in the parameter
/Inputs/Input 1/Status (0.20.02).

Possible states:

•

GPS

(SICLOCK GPS1000 and SICLOCK GPSDEC)

•

GPS (disturbed)

The signal reception is temporarily disturbed.

•

DCF77

(SICLOCK DCFRS and SICLOCK GPSDEC)

•

DCF77 (disturbed)

The signal reception is temporarily disturbed.

•

Serial

−

Meinberg

Meinberg format being received

−

NMEA

NMEA format being received

−

Telegram (disturbed)

Error detected in telegram or loss of telegram

•

No signal

The connection of individual sources of external synchronization is described in
the following.

Summary of Contents for SICLOCK TC100













































































































Search results

Summary of Contents for SICLOCK TC100

Reviews:

Siemens SICLOCK TC100, Operating Instructions Manual, Page: 37 / 124

Search results

Summary of Contents for SICLOCK TC100

Reviews: