Siemens SICLOCK TC100, Operating Instructions Manual, Page: 91 / 124

Parameter table
10-
©
Siemens AG 2010 All Rights Reserved
SICLOCK
®
TC100 Operating Instructions
Get more information
List of icons (Chapter C)
Authorization (Chapter 7.2.2)
0.28.03
Firmware base
(A2B00061430) A2B number Min:
Max:
Default: 0
4294967295
0
Version number Min:
Max:
Default: 0.0.0
65535.65535.65535
0.0.0
0.08.04
Firmware base
(U300) A2B number Min:
Max:
Default: 0
4294967295
0
Version number Min:
Max:
Default: 0.0.0
65535.65535.65535
0.0.0
0.08.02
Processor version A2B number Min:
Max:
Default: 0
4294967295
0
Version number Min:
Max:
Default: 0.0.0
65535.65535.65535
0.0.0
0.08.03
Hardware version A2B number Min:
Max:
Default: 0
4294967295
0
Release Min:
Max:
Default: 0
65535
0
Serial number
1) The access icons indicate the possibility of accessing with the highest authorization level.
Table 10-1 List of SICLOCK TC100 parameters
Access
1)
/ no.
Parameter Eintry Value range / default
Note
If the Configuration Tool is not authorized or is used with lower authorization
rights, then not all the parameters will be displayed. This restriction concerns,
e.g., settings under "System".
Furthermore, the access rights change with the authorization level.