Siemens SICLOCK TC100 Operating Instructions Manual Download Page 50

Page: 50 / 124

Configuration Tool

7-4

SICLOCK

TC100 Operating Instructions

7.2.1

Connect / disconnect online connection

How to establish an online connection to the SICLOCK TC100:

1. Enter the IP address of the device in the toolbar.:

2. Start establishing the connection by clicking the icon

next to the IP

address field.

−>

The Configuration Tool changes into online mode:

How to terminate the online connection to the SICLOCK TC100:

1. Click

next to the IP address field.

−>

The Configuration Tool changes into offline mode:

Confirm all events

Acknowledges all pending events
In online mode, an acknowledgment for all pending events is sent to the
device. An acknowledgment is made, even if the cause of the event is still
pending. This enables, e.g., persistent alarms to be deactivated.

Ignore event

Rejects the pending event
The event display is deleted without interaction with the device.

Table 7-2

Possible operations and displays in the toolbar of the Configuration Tool

Field / button

Meaning / instruction

Note

The connection to the device is terminated after about two hours without operator
input.

Summary of Contents for SICLOCK TC100













































































































Search results

Summary of Contents for SICLOCK TC100

Reviews:

Siemens SICLOCK TC100, Operating Instructions Manual, Page: 50 / 124

Search results

Summary of Contents for SICLOCK TC100

Reviews: