Siemens SICLOCK TC100 Operating Instructions Manual Download Page 19

Page: 19 / 124

Description

2-1

SICLOCK

TC100 Operating Instructions

2.6

Redundancy

Redundant external synchronization

Up to four time servers can be run on the SICLOCK TC100 for external synchro-
nization via NTP. However, they must all be in the same IP network.

Radio clocks cannot be connected redundantly to a SICLOCK TC100.

The order of priority among the external synchronizations (radio clock or NTP ser-
ver), and thus the redundancy behavior, can be set with parameters, see

Redundancy

(Chapter 9.1.3).

Redundant SICLOCK TC100 central plant clocks

A number of SICLOCK TC100s can be run as redundant time servers in a single
network.

You will find more detailed information in the chapters

Configuration Tool

(Chapter 7) and

Parameter table

(Chapter 10).

You can find more information on redundancy in

„Application Note 0108“

http://www.siemens.com/siclock under "FAQ".

Summary of Contents for SICLOCK TC100













































































































Search results

Summary of Contents for SICLOCK TC100

Reviews:

Siemens SICLOCK TC100, Operating Instructions Manual, Page: 19 / 124

Search results

Summary of Contents for SICLOCK TC100

Reviews: