manualshive.com logo in svg

Siemens SICLOCK TC100, Operating Instructions Manual, Page: 82 / 124

Share
Download
Siemens SICLOCK TC100 Operating Instructions Manual Download Page 82

Parameter assignment

9-

©

 Siemens AG 2010 All Rights Reserved

SICLOCK

®

 TC100 Operating Instructions 

Daylight saving

The device makes the daylight saving change automatically at the parameterized 
switching times.

Parameter /Time/Extended/Daylight Saving (0.09.07)

The setting "Change = No" suppresses the time change, and the plant is operated 
with standard time.

The calendar rule for the daylight saving time change can be defined worldwide 
via a parameter.

Leap seconds

You define the leap-second calendar with the parameter 
/Time/Extended/Leap Seconds[20] (0.09.05).

9.3.2

Synchronization

Synchronizaion status

You can readout the various information about the current synchronization status 
via the parameter /Synchronization/Synchronization Status (0.09.09).

Protected synchronization

If a discontinuity of longer than 5 seconds occurs in the external synchronization, 
the protected synchronization is activated. The synchronization is disabled, and 
an alarm is triggered, which is pending as long as the discontinuity in the external 
synchronization continues.

The pending synchronization disable can be ignored once and the "Protected 
Synchronization" alarm cleared with the parameter entry /Synchronization/Exten-
ded/Protected Synchronization/Ignore/Clear Alarm (0.09.12) = "Yes".

Note

The preset switching times are consistent with the regulations currently valid in 
the European Union.

Note

This synchronizes unconditionally with the external time, and a time jump can 
occur in the plant operation.

If required, disconnect the active external synchronization in advance or delete 
the server address for NTP client operation from the parameter 
/NTP Client/NTP Server List[4] (0.18.02).

Summary of Contents for SICLOCK TC100





























































































































Reviews:

No comments