manualshive.com logo in svg

Siemens SICLOCK TC100, Operating Instructions Manual, Page: 11 / 124

Share
Download
Siemens SICLOCK TC100 Operating Instructions Manual Download Page 11

Safety information

Siemens offers IT security mechanisms for its automation and drive product port-
folio in order to support the safe operation of the plant/machine. Our products are 
also continuously developed further with regard to IT security. We therefore 
recommend that you keep yourself informed about updates and upgrades for our 
products and always use the latest version of each product. For information on 
this topic, refer to: Industry Online Support (http://www.siemens.com/automa-
tion/csi_de_WW). You can register for a product-specific newsletter here.

For the safe operation of a plant/machine, however, it is also necessary to integ-
rate the automation components into an overall IT security concept for the entire 
plant/machine which corresponds to state-of-the-art IT technology. You can find 
information on this at: Industrial Security (http://www.siemens.com/industrialse-
curity).

Products used from other manufacturers should also be taken into account here.

Network security

In order to protect the entire plant from attacks on network security, correspon-
ding measures must be taken.

Caution

Failures or damage to your overall system

Unauthorized persons can gain entry into your network via the Ethernet ports and 
make changes to the SICLOCK TC100 parameterization. This can result in the 
time being adjusted. Individual or even all clients to be synchronized can be remo-
ved from the synchronization cycle. This has the potential to cause failures or 
damage throughout the plant.

Please adhere to the following safety measures:

−

Ensure that your network is protected against unauthorized access by instal-
ling a firewall at all Ethernet ports.

−

Change the default password immediately after commissioning. 

−

Limit the number of people to whom this password is known to the absolute 
minimum.

−

Change the password regularly.

Sicherheitshinweise

 

1

-1

0                                                                                          

©

 Siemens AG 2010 All Rights Reserved

  SICLOCK

®

 TC100 Operating Instructions

Summary of Contents for SICLOCK TC100





























































































































Reviews:

No comments