Siemens SICLOCK TC100 Operating Instructions Manual Download Page 81

Page: 81 / 124

Parameter assignment

SICLOCK

TC100 Operating Instructions

9.3

General settings on the device

The important general settings are described in the following, e.g. the time adjust-
ment, the synchronization response etc.

You will find a list of all the setting options in

Parameter table

(Chapter 10).

9.3.1

Time management

Setting the time manually

You can set the time in the device optionally with one of the following parameters:

•

Parameter /Time/Local Time (0.09.04)

•

Parameter /Time/UTC Time (0.09.02) (uniform universal time)

•

Parameter /Time/TAI Time (0.09.03) (atomic time)

Time zone

You define the offset from UTC to the zone time, without any daylight saving, with
the parameter /Time/Time Zone (0.09.06).

Difference between TAI and UTC

You can readout the difference between atomic time TAI and universal time UTC
in seconds with the parameter /Time/Extended/Atomic Time TAI/Offset from UTC
to TAI (0.09.01).

Note

Change the plant time at one single, central point, ideally on the central plant
clock.

Note

If the external synchronization already contains a time zone (e.g. DCF77 contains
CET/CEST), this is taken into account on reception.

If the time zone is not defined by the external synchronization (e.g. serial tele-
grams), then no further time zone correction is made.

Summary of Contents for SICLOCK TC100













































































































Search results

Summary of Contents for SICLOCK TC100

Reviews:

Siemens SICLOCK TC100, Operating Instructions Manual, Page: 81 / 124

Search results

Summary of Contents for SICLOCK TC100

Reviews: