manualshive.com logo in svg

Siemens SICLOCK TC100, Operating Instructions Manual, Page: 42 / 124

Share
Download
Siemens SICLOCK TC100 Operating Instructions Manual Download Page 42

Connection

6-

©

 Siemens AG 2010 All Rights Reserved

SICLOCK

®

 TC100 Operating Instructions 

6.4

Connecting alarm and warning outputs

During operation, the SICLOCK TC100 automatically carries out a range of func-
tion tests. If an error occurs, the device generates corresponding messages on 
the display. A distinction is made between alarms and warnings. 

There is an alarm output and a warning output for external monitoring on terminal 
X2.

Figure 6-6 Alarm output X2-7 and warning output X2-8

Example: 

Set the alarm output if there is no external synchronization.

Use the Configuration Tool to set the parameter entry /Synchronisation/Exen-
ded/Monitoring/Monitor Synchronization Status (0.09.14) = "Alarm" to activate 
monitoring / alarm output in case of error.

;

;

;

Table 6-3

Parameters affecting the alarm behavior

/Synchronization/Extended/Monitoring/Monitor Synchronization Status (0.09.14)

/Network Settings/Ethernet 1/Extended Settings Adapter 1/Monitor Link Status (0.05.09)

/NTP Client/Monitoring/Monitor Server (0.18.04)

/Environment/Extended/Temperature/Monitoring (0.24.01)

Note

The contacts are designed as wire-break-proof, normally closed contacts. If there 
is an alarm or warning, the corresponding contact opens.

Summary of Contents for SICLOCK TC100





























































































































Reviews:

No comments