manualshive.com logo in svg

Siemens SICLOCK TC100, Operating Instructions Manual, Page: 77 / 124

Share
Download
Siemens SICLOCK TC100 Operating Instructions Manual Download Page 77

Parameter assignment

9-7

©

 Siemens AG 2010 All Rights Reserved

  SICLOCK

®

 TC100 Operating Instructions

9.1

Connecting external synchronization

The external synchronizations can be connected to SICLOCK TC100 via 
Ethernet as an NTP server and/or as a radio clock via point-to-point connections.

The prerequisite for operation is at least one external synchronization. Additional 
external synchronizations can serve as substitute synchronizations in the event 
of a fault, see 

Redundancy

 (Chapter 2.6).

GPS and DCF77 radio clocks, cable distribution installations, atomic clocks and 
other signal sources can serve as external synchronizations.

Get more informationen

Synchronization

 (Chapter 9.3.2).

9.1.1

Radio clocks via terminals

A radio clock can be connected, see also 

Terminal assignment

 (Chapter 15.1). 

Monitoring

The input signal of the radio clock can be monitored with the parameter 
/Inputs/Input 1/Monitoring (0.20.01), and an alarm or warning output after expiry 
of the monitoring time.

Status display

See 

Connecting external synchronization

 (Chapter 6.3).

Serial formats

The parameter /Inputs/Input 1/Framing (0.20.03) shows the automatically detec-
ted framing for serial formats.

There are entries for baud rate, data bits, parity and stop bits.

Summary of Contents for SICLOCK TC100





























































































































Reviews:

No comments