Siemens SICLOCK TC100 Operating Instructions Manual Download Page 46

Page: 46 / 124

Configuration Tool

7-4

SICLOCK

TC100 Operating Instructions

Working with the Configuration Tool

How to start the Configuration Tool:

1. Open the Web browser

2. Enter the address of the device port, e.g. 192.168.1.10

3. If necessary, confirm the installation and execution of the applet with "Yes"

and/or "Always".

−>

The Configuration Tool is started and displayed in the browser.

How to assign parameters to the SICLOCK TC100 with the Configuration
Tool:

1. Connect the Configuration Tool to the SICLOCK TC100 with the button

2. In the case of a new assignment of parameters to the device, load the para-

meters into the Configuration Tool with the

button, or open an existing

parameter file (*.u600) with the button

3. Assign parameters to the SICLOCK TC100 according to your hardware con-

figuration and requirements.
In online mode, changes become immediately effective in the device.

4. Back up the configuration as a parameter file (*.u600) on your PC with the

button.

Note

Take note of the information in your browser concerning restrictions as a result of
high security settings.

Note

In order to be able to fall back on the last version of the SICLOCK TC100 para-
meter assignment, we recommend backing up the current parameter assignment
of SICLOCK TC100 as a *.u600 file before you make any changes.

Summary of Contents for SICLOCK TC100













































































































Search results

Summary of Contents for SICLOCK TC100

Reviews:

Siemens SICLOCK TC100, Operating Instructions Manual, Page: 46 / 124

Search results

Summary of Contents for SICLOCK TC100

Reviews: