Siemens SICLOCK TC100 Operating Instructions Manual Download Page 117

Page: 117 / 124

Glossary

D-11

SICLOCK

TC100 Operating Instructions

Events

An event is triggered by the device, and is a message or a device status.

See

Device

Event type

The various types of event are classified as follows:

•

System

•

Application

•

Information

•

Warning

External synchronization

External time source that is used to synchronize the SICLOCK TC100.

Filters

The archive can be searched for specific events with the aid of an Include and an
Exclude filter.

See

Archive

Local area networks (LAN)

A local area network describes the networking of various components for mutual
data exchange.

Non-networked plant components

All plant components which are not time-synchronized via local networks but via
point-to-point connections are termed non-networked plant components.

See

Point-to-point connection

NTP - Network Time Protocol

Standard for synchronizing clocks in computer systems via packet-based com-
munication networks.

Offline mode

There is no connection between the Configuration Tool and the device.

The current status is shown in color in the entry field of the IP address, in online
mode the IP address is green.

Summary of Contents for SICLOCK TC100













































































































Search results

Summary of Contents for SICLOCK TC100

Reviews:

Siemens SICLOCK TC100, Operating Instructions Manual, Page: 117 / 124

Search results

Summary of Contents for SICLOCK TC100

Reviews: