manualshive.com logo in svg

Siemens SENTRON PAC3200, Manual, Page: 3 / 182

Share
Download
Siemens SENTRON PAC3200 Manual Download Page 3

 

SENTRON PAC3200 
Manual, 02/2008, A5E01168664B-04 

3

 

Table of contents 

1 

Introduction.............................................................................................................................................. 11 
1.1 

Purpose of this document ............................................................................................................11 

1.2 

Orientation aids............................................................................................................................12 

1.3 

Components of the product..........................................................................................................12 

1.4 

Contents of the CD for the SENTRON PAC Power Monitoring Device.......................................13 

1.5 

Technical support.........................................................................................................................13 

1.6 

Further documentation.................................................................................................................15 

2 

Safety instructions ................................................................................................................................... 17 
2.1 

Safety notes .................................................................................................................................17 

3 

Description............................................................................................................................................... 19 
3.1 

Features.......................................................................................................................................19 

3.2 

Measuring inputs..........................................................................................................................22 

3.3 

Measured variables......................................................................................................................24 

3.4 

Power demands and counters .....................................................................................................32 

3.5 

Tariffs ...........................................................................................................................................33 

3.6 

Limits............................................................................................................................................34 

3.7 

Behavior in the case of power failure and power restore ............................................................36 

3.8 

Digital inputs and outputs.............................................................................................................36 

3.9 

Ethernet port ................................................................................................................................38 

3.9.1 

Ethernet........................................................................................................................................38 

3.9.2 

Modbus TCP ................................................................................................................................38 

3.9.3 

Modbus measured variables with the function codes 0x03 and 0x04 .........................................40 

3.9.4 

Structure - Digital input status and digital output status with the function codes 0x03 and 

0x04 .............................................................................................................................................44 

3.9.5 

Structure - Device diagnostics and device status with the function codes 0x03 and 0x04 .........45 

3.9.6 

Structure - Limit values with function codes 0x03 and 0x04........................................................45 

3.9.7 

Modbus status parameters with the function code 0x02 .............................................................46 

3.9.8 

Modbus settings with the function codes 0x03, 0x04 and 0x10 ..................................................47 

3.9.9 

MODBUS communication parameter with the function codes 0x03, 0x04 and 0x10..................58 

3.9.10  Modbus device information with the function codes 0x03, 0x04 and 0x10 .................................59 

3.9.11  Modbus command parameters ....................................................................................................61 

3.9.12  MODBUS standard device identification with the function code 0x2B ........................................62 
3.10 

Slot for expansion modules..........................................................................................................63 

3.11 

Slots on the rear of the device .....................................................................................................64 

4 

Operation planning .................................................................................................................................. 65 
4.1 

Operation planning.......................................................................................................................65 

Summary of Contents for SENTRON PAC3200























































































































































































Reviews:

No comments