Siemens SENTRON PAC3200 Manual Download Page 104

Page: 104 / 182

Operator control

8.1 Device interface

SENTRON PAC3200

104

Manual, 02/2008, A5E01168664B-04

Display: Display - Display title - Key labeling
The display is structured as follows:
●

Display area - represents the current measured values, device settings and selection

menus.

●

Header area - specifies the information visible in the display area.

●

Footer area - specifies the functions assigned to the function keys.

Function keys: Key labeling - Key surfaces
The four function keys F1 to F4 enable operator input to the device:
●

Navigation in the menus

●

Selection of the measured value displays

●

Display and editing of the device settings

The keys have multiple assignments. Function assignments and key labeling change

according to the context of operator input. The designation of the current key function can be

seen above the key number in the footer area of the display.
A short press on the key triggers the function once. Holding the key down for longer switches

on the autorepeat function after approximately 1 second. The function of the key is triggered

repeatedly while the key is held down. Autorepeat is useful, for example, for fast

incrementing of values when parameterizing the device.

Organization of information

The display organizes the viewable information as follows:
Measured variables
●

Display of the measured variables

The display shows the measured values of the currently selected measured variable.

Menus
●

"MAIN MENU"

The display lists the viewable measured variables.

●

"SETTINGS" menu

The display lists the device settings.

The "SETTINGS" menu is a submenu of the "MAIN MENU".

The "SETTINGS" menu contains further submenus.

Device settings
●

Display of the device settings

The display shows the values of the currently effective device settings.

●

Edit mode of the device settings

The display enables editing of the device settings.

The figure below shows the structure.

Summary of Contents for SENTRON PAC3200























































































































































































Search results

Summary of Contents for SENTRON PAC3200

Reviews:

Siemens SENTRON PAC3200, Manual, Page: 104 / 182

Search results

Summary of Contents for SENTRON PAC3200

Reviews: