manualshive.com logo in svg

Siemens SENTRON PAC3200, Manual, Page: 38 / 182

Share
Download
Siemens SENTRON PAC3200 Manual Download Page 38

Description 

 

3.9 Ethernet port 

 

SENTRON PAC3200 

38

 

Manual, 02/2008, A5E01168664B-04 

3.9

 

Ethernet port 

3.9.1

 

Ethernet 

Electrical connection 

 

NOTICE 

 

Incorrect network settings can adversely affect and interfere with the functions of other 

network nodes  

The network settings for Ethernet are defined by the system administrator and set 

accordingly on the device.  

If the setting data is not known, the (patch) cable must not be connected. 

 

The SENTRON PAC3200 has an RJ45 socket on the top. The device can be connected to 

Ethernet with an RJ45 connector, type T-568B. 

3.9.2

 

Modbus TCP 

Support of MODBUS TCP via Ethernet interface 

The SEAbus TCP protocol is the default. 
You change the transmission protocol from SEAbus TCP (default setting) to MODBUS TCP 

with F4 

 > "SETTINGS> COMMUNICATION > PROTOCOL". 

Before user data can be transmitted via MODBUS TCP, a TCP/IP connection must first be 

established between the client and the server. The port number 502 is established for 

MODBUS TCP on the server side. 
Before changing to MODBUS TCP, enter the network parameters for IP-ADDRESS, 

SUBNET and GATEWAY. Ask your network administrator for suitable values. 

Setting the network parameters 

 

Figure 3-8 

"COMMUNICATION" device setting 

Use F4 

 to switch to edit mode. 

Summary of Contents for SENTRON PAC3200























































































































































































Reviews:

No comments