Siemens SENTRON PAC3200 Manual Download Page 25

Page: 25 / 182

Description

3.3 Measured variables

SENTRON PAC3200
Manual, 02/2008, A5E01168664B-04

Root-mean-square

values

Designation Instantane

ous value

Min. Max. Mean

value

over all

phases

Mean value

over demand

period

Total value Unit

Working hours

counter

Bh (load

runtime)

✓

[h]

Voltage unbalance Unbal.V

✓

[%]

Current unbalance Unbal. A

✓

[%]

1) Instantaneous, minimum and maximum value in each case.

2) Mean value of the total power of the system/plant. Can only be called via bus.

3) The current tariff is shown on the display. The "+" sign stands for "Active energy import". The "-" sign stands

for "Active energy export".

4) The current tariff is shown on the display. The "+" sign stands for "Reactive energy import". The "-" sign

stands for "Reactive energy export".

5) The unit depends on the settings: no unit or "kWh" or "kvarh" in the case of pulse counter function.

Overload display

Voltage or current overload is indicated on the display.

Figure 3-1

Overload display

Zero point suppression level

The zero point suppression level can be set via the interface in the range 0% to 10% of the

measuring range final value (default value 0.0%). Currents within this range are indicated on

the display with "0" (zero).

Current direction

The current direction can be changed on the device or via the interface for all phases in

common. This means it is not necessary to change the terminal connections of the current

transformer in the event of connection errors.

Summary of Contents for SENTRON PAC3200























































































































































































Search results

Summary of Contents for SENTRON PAC3200

Reviews:

Siemens SENTRON PAC3200, Manual, Page: 25 / 182

Search results

Summary of Contents for SENTRON PAC3200

Reviews: