manualshive.com logo in svg

Siemens S223, User Manual

The Siemens S223 user manual is essential for mastering your device's features and functions. Find it available for free download on our website, guaranteeing easy access to detailed instructions and troubleshooting tips. Enhance your product experience with the comprehensive manual from manualshive.com.

Share
Download
background image

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         69 

Command Mode 

Description 

dot1x reauth-enable

 

PORTS

 Enables 

802.1x 

re-authentication. 

no dot1x reauth-enable

 

PORTS

 

Global 

Disables 802.1x re-authentication. 

 

4.5.2.2 

Configuring the Interval of Re-Authentication 

RAIDIUS server contains the database about the user who has access right. The data-
base is real-time upgraded so it is possible for user to lose the access right by updated 
database even though he is once authenticated. In this case, even though the user is ac-
cessible to network, he should be authenticated once again so that the changed database 
is applied to. Besides, because of various reasons for managing RADIUS server and 
802.1x authentication port, the user is supposed to be re-authenticated every regular time. 
The administrator of hiD 6615 S223/S323 can configure a term of re-authentication. 

To configure a term of re-authentication, use the following command. 

Command Mode 

Description 

dot1x timeout reauth-period

 <1-

4294967295> 

PORTS

 

Sets the period between re-authentication attempts. 

no dot1x timeout reauth-period

 

PORTS

 

Global 

Deletes the period between re-authentication attempts.

 

4.5.2.3 

Configuring the Interval of Requesting Re-authentication 

When the authenticator sends Request/Identity packet for re-authentication and no re-
sponse is received from the suppliant for the number of seconds, the authenticator re-
transmits the request to the suppliant. In hiD 6615 S223/S323, you can set the number of 
seconds that the authenticator should wait for a response to request/identity packet from 
the suppliant before retransmitting the request. 

To set a period that the authenticator waits for a response, use the following command. 

Command Mode 

Description 

dot1x timeout quiet-period

 <1-

65535> 

PORTS

 

Sets reattempt interval for requesting request/identity 
packet. 
1-65535: reattempt interval seconds 
PORTS: enters port number 

no dot1x timeout quiet-period

 

PORTS

 

Global 

Disables the interval for requesting identity. 

 

4.5.2.4 802.1x 

Re-authentication 

In  4.5.2.2  Configuring the Interval of Re-Authentication, it is described even though the 
user is accessible to network, he should be authenticated so that the changed database 
is applied to. 

Besides, because of various reasons managing RADIUS server and 802.1x authentica-
tion port, the user is supposed to be re-authenticated every regular time. 

To implement re-authentication immediately regardless of configured time interval, user 

Summary of Contents for S223






























































































































































































































































































































































































Reviews:

No comments

Related manuals for S223

H3C S3100 Series Operation Manual preview
S3100 Series
Brand: H3C Pages: 1057
i-MO 540 Series Product Installation Manual preview
540 Series
Brand: i-MO Pages: 58
Icidu NI-707533 Manual Manual preview
NI-707533
Brand: Icidu Pages: 10
AT&T Nighthawk M6 Pro Let'S Get Started preview
Nighthawk M6 Pro
Brand: AT&T Pages: 2
Western Digital Scorpio WD2500BPVT Product Specifications preview
Scorpio WD2500BPVT
Brand: Western Digital Pages: 3
Western Digital Scorpio WD2500BPVT Product Features preview
Scorpio WD2500BPVT
Brand: Western Digital Pages: 4
ZyXEL Communications P-336M Specifications preview
P-336M
Brand: ZyXEL Communications Pages: 2
Omega Engineering OME-A8111 Hardware Manual preview
OME-A8111
Brand: Omega Engineering Pages: 34
IBA ibaFOB-4i-X Manual preview
ibaFOB-4i-X
Brand: IBA Pages: 33
8e6 Technologies ER3-100 (5K02-55) Quick Start Manual preview
ER3-100 (5K02-55)
Brand: 8e6 Technologies Pages: 74
Abocom WM3111 Specification preview
WM3111
Brand: Abocom Pages: 1
Patton electronics 3087 Quick Start Manual preview
3087
Brand: Patton electronics Pages: 12
ETAS BR-XETK-S4.0 User Manual preview
BR-XETK-S4.0
Brand: ETAS Pages: 82
WolfPack 18x18 Card Cage User Manual preview
18x18 Card Cage
Brand: WolfPack Pages: 31
NETGEAR RH328 Reference Manual preview
RH328
Brand: NETGEAR Pages: 142
Ubiquiti PowerBeam PBE-5AC-400-ISO Quick Start Manual preview
PowerBeam PBE-5AC-400-ISO
Brand: Ubiquiti Pages: 23
Z-Com ZCN-1523H-5-16 Quick Installation Manual preview
ZCN-1523H-5-16
Brand: Z-Com Pages: 18
TRENDnet TEW-641PC Quick Installation Manual preview
TEW-641PC
Brand: TRENDnet Pages: 12

Brands by name

Popular brands

Load more brands