User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 151
7.6.4.1 Rule
Creation
For the hiD 6615 S223/S323, you need to open
Admin Access
Rule Configuration
mode
first. After opening
Admin Access
Rule Configuration
mode, the prompt changes from
SWITCH(config)# to SWITCH(config-admin-rule[NAME])#.
To open
Rule Configuration
mode, use the following command.
Command Mode
Description
rule
NAME
create
admin
Global
Opens
Admin Access Rule Configuration
mode, enter
rule name.
After opening
Admin Access
Rule Configuration
mode, a rule can be configured by user.
The rule priority, packet classification and rule action(s) can be configured for each rule.
1. The rule name must be unique. Its size is limited to 63 significant characters.
2. The order in which the following configuration commands will be entered is arbitrary.
3. The configuration of a rule being configured can be changed as often as wanted
(inclusive rule type) until the command,
apply
, will be entered.
4. Use the command,
show rule-profile
, to display the configuration entered up to now.
7.6.4.2 Rule
Priority
If rules that are more than two match the same packet then the rule having a higher prior-
ity will be processed first.
To set a priority for an admin access rule, use the following command.
Command Mode
Description
priority
{
low
|
medium
|
high
|
highest
}
Admin-rule
Sets a priority for a rule.
(Defaul: low)
i
