User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 105
To display a configured SNMP community, use the following command.
Command Mode
Description
show snmp community
Enable
Global
Shows a created SNMP community.
The following is an example of creating 2 SNMP communities.
SWITCH(config)#
snmp community ro
public
SWITCH(config)#
snmp community rw
private
SWITCH(config)#
show snmp community
Community List
Type Community
Source
OID
-----------------------------------------------
ro public
rw private
SWITCH(config)#
7.1.2
Information of SNMP Agent
You can specify basic information of SNMP agent as administrator, location, and address
that confirm its own identity.
To set basic information of SNMP agent, use the following command.
Command Mode
Description
snmp contact
NAME
Sets a name of administrator.
snmp location
LOCATION
Sets a location of SNMP agent.
snmp agent-address
IP-ADDRESS
Sets an IP address of SNMP agent.
no snmp contact
no snmp location
no snmp agent-address
IP-ADDRESS
Global
Deletes specified basic information for
each item.
The following is an example of specifying basic information of SNMP agent.
SWITCH(config)#
snmp contact
Brad
SWITCH(config)#
snmp location
Germany
SWITCH(config)#
To display basic information of SNMP agent, use the following command.
Command Mode
Description
show snmp contact
Shows a name of administrator.
show snmp location
Shows a location of SNMP agent.
show snmp agent-address
Enable
Global
Shows an IP address of SNMP agent.
