User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 159
Step 2
Set the maximum number of secure MAC address for the port.
Command Mode
Description
port security
PORTS
maximum
<1-16384>
Bridge
Sets a maximum number of secure MAC address for
the port.
1-16384: Maximum number of addresses (default: 1)
Step 3
Set the violation mode and the action to be taken.
Command Mode
Description
port security
PORTS
violation
{
shutdown
|
protect
|
restrict
}
Bridge
Selects a violation mode.
When configuring port security, note that the following information about port security vio-
lation modes:
•
protect
drops packets with unknown source addresses until you remove a sufficient
number of secure MAC addresses to drop below the maximum value.
•
restrict
drops packets with unknown source addresses until you remove a sufficient
number of secure MAC addresses to drop below the maximum value and causes the
Security Violation counter to increment.
•
shutdown
puts the interface into the error-disabled state immediately and sends an
SNMP trap notification
Step 4
Enter a secure MAC address for the port.
Command Mode
Description
port security
PORTS
mac-
address MACADDR
vlan NAME
Bridge
Sets a secure MAC address for the port.
PORTS: select the port number.
MACADDR: enter the MAC address.
NAME: vlan name
To disable the configuration of port secure, use the following command.
Command Mode
Description
no port security
PORTS
Disables port security on the port.
no port security
PORTS
mac-
address MACADDR
vlan NAME
Deletes a secure MAC address for the port.
PORTS: enter the port number
MACADDR: enter the MAC address.
no port security
PORTS
maxi-
mum
Returns to the default number of secure MAC address.
(default: 1)
no port security
PORTS
viola-
tion
Bridge
Returns to the violation mode to the default. (shutdown
mode)
